General
Rapid check-out of an antenna in the field or stationary conditions.
Tuning an antenna to resonance.
Comparing characteristics of an antenna before and after a specific event (rain, hurricane, etc.).
Measuring capacitance or inductance of reactive loads.
General
Frequency Range
0.1 to 230 MHz
Frequency Entry
1 KHz Resolution
Measurement For
25, 50, 75, 100, 150, 200, 300, 450, and 600-Ohm systems
SWR Measurement Range
1 to 100 in numerical modes, 1 to 10 in chart modes
R and X Range
0…10000, -10000…10000
Display Modes
SWR, return loss, R, X, Z, L, C, Magnitude and Phase Angle at single frequency
SWR chart, 100 points.
SWR chart at fixed HAM bands by IARU Regions, 100 points.
Multé mode – to check your multiband antenna promptly.
RF output
Connector type: UHF (SO-239).
Output signal shape: square, 0.1 to 230 MHz.
Output power: -10 dBm (at 50 Ohm load).
Power
One 3.7V Li-Ion battery, type 18650
When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
200×200 monochrome e-paper display, 2×3 keys on the water-proof keypad, English menus and help screens, USB connection to a personal computer
Bluetooth
v.4.2 BLE Single-mode, Class B
Dimensions
185 mm x 40 mm x 33 mm (7,3 in x 1,6 in x 1,3 in)
Operating temperature
0…40 °C (32…104 °F)
Weight
185 g (6,5 Oz) with battery
Warranty
2 years
-
RigExpert Stick 230 Antenna Analyzer (with a Li-ion Battery Type 18650)
-
Quick Start Guide
Neck Strap
-
USB Cable