Canadian-owned and operated since 1999General
Dimensions Without Bracket (LxWxH)
3.94? x 3.94? x 1.57? (100 x 100 x 40 mm)
Dimensions With Bracket (LxWxH)
3.94? x 4.53? x 1.89? (100 x 115 x 48 mm)
Weight
1.01 lb (460 g)
Amplifier Class
Class-D
CEA-2006 power rating
20 watt RMS x 2 @ 14.4 V input - 4 ohm less than 1% THD
Total rated power output - 2 Ohm (Watts)
30 watt RMS x 2 @ 14.4 V input - 2 ohm less than 1% THD
Total rated power output - 4 Ohm Bridged (Watts)
140 Watts
Input sensitivity
0.45 V RMS
Input impedance
9k Ohm
Operating voltage
10.8 V - 32 V DC
Current consumption (StandBy)
less than 1 mA @ 14.4 V input
Current consumption (Idle)
less than 0.04 A @ 14.4 V input
Current consumption (Max)
10 A
Fuse rating
16 A electronic fuse (no replacement necessary)
Ignition Safety Protected (SAE J1171)
yes
Protection circuits
Reverse voltage, Input under/over voltage, Over temperature, Output short circuit
Operating Temperature Range
0° to 50° C
Warranty
3 years
General
Power And Efficiency
The Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650-watt RMS and the 4/6/8 channel amplifiers produce 150-watt RMS per channel.
Easy Tune Feature
These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, you can get the best quality sound without making manual adjustments.
Less Distortion
Some amplifiers distort audio when they add power. Ours are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes.
LED Indicators
Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts as well as temperature.
Mounting Brackets
Easily install the amplifiers on board with the included mounting brackets.
Ignition Protected
The ignition protected design helps prevent potential damage from overheating.
Conformal-Coated PCBS
The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements.
2 OHM Stable
You can connect up to two speakers per channel, increasing setup options.
Fusion True-Marine Design
The amplifiers are designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration and UV.
140-Watt Zone Amplifier
The compact zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. It’s compatible with 12- and 24-volt electrical systems.
-
One Apollo zone amplifier
-
One mounting bracket
Three 6-gauge, self-tapping screws
-
Wiring loom
Installation instructions
Important safety and product information (ISPI)