Canadian-owned and operated since 1999General
Power And Efficiency
The Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650-watt RMS and the 4/6/8 channel amplifiers produce 150-watt RMS per channel.
Easy Tune Feature
These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, you can get the best quality sound without making manual adjustments.
Less Distortion
Some amplifiers distort audio when they add power. Ours are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes.
LED Indicators
Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts as well as temperature.
Mounting Brackets
Easily install the amplifiers on board with the included mounting brackets.
Ignition Protection
The ignition protected design helps prevent potential damage from overheating.
Conformal-Coated PCBS
The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements.
2 OHM Stable
You can connect up to two speakers per channel, increasing setup options.
Fusion True-Marine Design
The amplifiers are designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration and UV.
1200-Watt 4 Channel Amplifier
This 4 channel amplifier with 150-watt RMS per channel can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.
General
Physical Dimensions Without Bracket (LxWxH)
9.25" x 7.06" x 1.75" (235 x 180 x 45 mm)
Physical Dimensions With Bracket (LxWxH)
9.25" x 7.06" x 2.13" (235 x 180 x 50 mm)
Weight
4.85 lb (2.2 kg)
Water Rating
IPX2
Amplifier Class
Class-D
CEA-2006 Power Rating
150 watt RMS x 4 @ 14.4 V input - 4 ohm < 1% THD
Total Rated Power Output - 2 ohm (watts)
290 watt RMS x 4 @ 14.4 V input - 2 ohm < 1% THD
Total Rated Power Output - 4 ohm Bridged (watts)
6 Channel:580 watt RMS x 2 @ 14.4 V input - 4 ohm Bridged < 1% THD
Peak Power (watts)
1200 watts
Input Sensitivity
1.6 V RMS
Input Impedance
22k ohm
Operating Voltage
10.8 V - 16 V DC
Current draw, in standby/off using amplifier on wire
less than 5 mA @ 14.4 V input
Current Consumption (Idle)
less than 1.15 A @ 14.4 V input
Fuse Rating
85 A electronic fuse (no replacement neccessary)
Ignition Safety Protected (SAE J1171)
yes
Protection Circuits
Reverse voltage, Input under/over voltage, Over temperature, Output short circuit
Operating Temperature Range
32° to 122° F (0° to 50° C)
Warrenty
3 years
-
One Apollo 4 channel amplifier
-
One mounting bracket
-
One power connector
-
Two speaker connectors with high power mode adapters
-
Four 8-guage, flat head self-tapping screws
-
Four 8-guage, pan head self-tapping screws (for mounting bracket)
-
Four screw covers
-
Mounting template
-
Installation instructions
-
Important safety and product information (ISPI)