A-1015-G 6 Metre VHF Amplifier
VHF AMP, 10W IN-150W OUT, 50-52 MHz
Mirage A-1015-G Amplifiers are the most popular 6 Meter All-Mode Amplifiers in the world! They give you 150 watts of output power with 10 watts input from almost any 6 meter mobile or base rig.
With Mirage A-1015-G Amplifiers, you will reach more 6 Meter DX stations and sound better on all modes - FM, Digital, SSB, and CW. Also, you will receive all types of signals better than you've ever received them before! These amplifiers have built-in low noise GaAsFET preamplifiers with excellent noise figures, for pulling out weak signals on almost any 6 meter antenna system.
For operations at the low end of the band, the Mirage exclusive Active-Bias™ system keeps SSB voice crisp and clear for fantastic operation. Other amplifiers using conventional bias methods tend to produce splatter and distortion as the power level changes; however, these Mirage amplifiers with Active-Bias™ do not exhibit those problems.
Mirage A-1015-G Amplifiers are fully protected with features found in expensive commercial amplifiers. High SWR or excessive input power can damage your amplifier, but Mirage amplifiers have built-in protection circuits that automatically bypass your amplifier to prevent damage, with LED indicators that alert you of the fault condition. These amps are ideal for any 6 Meter transceiver from 1 to 15 watts output, providing about 40 watts output for 2 watts input, 100 watts output for 5 watts input, and 150 watts out for 10-15 watts input, on any mode!
Mirage A-1015-G Amplifiers have a rear panel RCA phono connector for transceiver direct keying. (They can also be internally enabled to use an internal RF sensing system that automatically keys the bypass relay, which disconnects the preamplifier if it is on and places the unit into the transmit mode when the amplifier power switch is on.) Their mode switches and adjustable time delays provide smooth transmit to receive switching for every mode. These amplifiers have extra heavy duty custom heat sinks that span the entire depth of their chassis. Plus, a rear panel connector allows these amplifiers to be remotely controlled, so they may be placed out of the way.