IC-R6 Wideband handheld receiver

Features :

- 100kHz–1309.995 MHz* wideband coverage

While the IC-R6 receives an ultra wideband frequency range, the radio provides superior sensitivity and receiver characteristics that is insusceptible to interference. Amateur stations, AM, FM, short wave broadcasts, TV audio* and a variety of utility communications can be caught and listened to.
* Frequency range depends on version. Analog TV audio only. Cannot decode digital TV audio.

-100 channels per second high speed scan

The IC-R6 has 100 channels per second high speed scan capability*. This superior scanning power allows the utmost efficiency when searching over 1300MHz of spectrum!
* VFO mode scanning.

-15 hours of continuous receive capability*

The IC-R6 is energy-efficient, designed to provide many hours of listening enjoyment on a single charge. With the supplied rechargeable Ni-MH cells (1400mAh ×2), the IC-R6 provides up to 15 hours of continuous receive capability*.
* At 50mW output using external speaker.

-1300 memory channels with 22 memory banks

With 1300 alphanumeric memory channels, 50 scan edges and 200 auto write memories, the IC-R6 gives you flexible scanning. Use the bank link scan feature to choose from and connect any of the 22 memory banks.

-VSC (Voice Squelch Control)

The VSC opens the squelch only when a modulated signal is detected and ignores unmodulated beat noise. It is a handy feature for those listeners who are scanning for talk, news and music, but not data bursts or beacons.

-Multiple power choices

The IC-R6 can be powered by rechargeable Ni-MH cells, or with alkaline batteries. Run the IC-R6 using the AC adapter, BC-196S, or opt for a cigarette lighter cable, CP-18. When used the optional drop-in charger stand BC-194 with the AC adapter or cigarette lighter cable, you can easily start charging the Ni-MH cells, while eliminating the need to connect the power source to the DC power jack of the receiver.

-Internal bar-antenna (For superior AM reception)

-Louder, Clerarer Audio Output (BTL Circuits)

-Tone (CTCSS decode) & DTCS decode

Specifications:

General
Frequency coverage France	0.100 - 1309.995* MHz 0.100–29.995, 50.2–51.2, 87.5–107.995, 144–146, 430–440, 1240–1300 MHz *Cellular blocked; U.S.A version
Mode	AM, FM, WFM
Number of memory channels	1300 regular, 50 scan edges and 200 auto memory write
Usable temperature range	-10°C to +60°C +14°F to +140°F
Frequency stability	±1.0ppm (25°C)
Tuning steps	5, 6.25, 8.33, 9, 10, 12.5, 15, 20, 25, 30, 50,100, 125, 200 kHz * Selectable depending on operating bands.
Battery requirement	2×R6 (AA) size Ni-MH or Alkaline cells
External power supply	4.5V DC rated (4.5-6.3V with BC-196SA/SD, CP-18A/E)
Current drain Rated audio Standby Power save	(at 3.0v DC; typical) 130 mA (Ext. SP, backlight off) 65 mA 30 mA (1:4 duty)
Antenna impedance	50O (SMA)
Dimensions (projections not included)	58(W) × 86(H) × 29.8(D) mm 2⁹/₃₂(W) × 3³/₈(H) × 1¹/₁₆(D) in
Weight	200 g; 7.1 oz

Note:All stated specifications are subject to change without notice or obligation.

Icom

Products Related To This Search