Blu <>Hub® Dual-Module Driver/Passenger Bluetooth® Dongle Kit with aptX™ Digital Stereo 2001-2017 Honda® GL1800/F6B
This is J&Ms Blu<>Hub® dual-module Bluetooth Dongle kit featuring the CSR/Qualcomm BlueCore8 IC chip-sets, loaded with J&M’s exclusive JMAHP software profile, for installation into 2001-2017 Honda GL1800/F6B.
This latest version of the JMAHP profile from J&M provides low-latency aptX™ digital stereo to the headset, (aptX decoding active with BT03+plus or later model J&M headset) with simultaneous and continuous microphone signals back to the dongle audio source, allowing full stereo music, private driver/passenger intercom and CB radio transmissions.
Now you can finally “Cut-The-Cord” between your helmet headset and the factory audio system on the GL1800/F6B WITHOUT sacrificing that great J&M sound!
This new J&M Blu<>Hub dongle will also link to most brands of Bluetooth helmet headsets available in the marketplace today and provide mono audio to the headset with simultaneous and continuous mike signals back to the audio system, for full intercom and CB radio communications.
The factory handlebar & dash-knob volume controls will raise and lower the music, intercom & CB volume levels inside each Bluetooth headset, once linked and adjusted.
Either driver or passenger can also link their own cell phone to their individual J&M Bluetooth headsets, simultaneously with this Blu<>Hub dongle, for automatic switching back & forth between stereo music/intercom/CB and individual cell phone conversations.
With this J&M Blu< >Hub dongle system installed, CORDED helmet headsets can still be used at any time thru the standard headset connection plugs, simultaneous with either of the Bluetooth headset links.
The Blu<>Hub dongle will turn on and off automatically with the motorcycle ignition and there are NO BATTERIES EVER, to charge or replace.
This Blu<>Hub dongle kit is 100% plug-n-play into the GL1800/F6B as a permanent and secure installation inside the left fairing pocket location.
The Blu<>Hub dongle is a snap to remove and plug into any computer via the standard USB port, for software updates direct from the J&M website should they be needed.
Assembled in the USA at our factory in Tucson Arizona, with comprehensive linking and operation manual included.