The Pro 7 offers a feature set that compliments the Heil Sound standard for headset design. Unlike copies of various aviation type headsets, the PRO 7 is not a copy. It brings newtechnology to the headset industry. The 2" thick gel foam ear pads provide extreme comfort for extended periods of time while exhibiting passive noise reduction rated at -26dB, ideal for use in high ambient noise environments. Using technology Bob Heil learned from Paul Klipsch back in the early 70's, the ear cup enclosures were tuned to the free air cone resonance of the speaker cone thus providing very low distortion with maximum voice articulation providing the ultimate sound reproduction for communications. The exclusive Heil Phase Reversal system (HPR) allows you to acoustically move the signals forward and creates a spatial widening of the sound field. This feature makes it easier to pull a weak signal from a pileup – useful for DxPeditions and contests as well as a stress reliever as you change the phase angle of the program source. A speaker balance control allows preferred level between the speakers.
Designed exclusively for iCOM radios, the iC Electret element has a -3dB fixed point at 35 Hz and 12kHz with the sensitivity of-48 at 1500 ohms output centered at 1kHz. The iC element solves the problems with LOW GAIN ICOM radios but can also work with great results on newer Icom models. Bias power is applied to operate the iC electret element. The Pro 7 iC is supplied with our ADl-iC eight pin iCOM adapter cable.
- Gel filled foam ear seals provide 26 dB PNR outside noise reduction
- 40 mil high response speakers produce extreme voice articulation
- Acoustically tuned speaker enclosure
- -3 dB points set at 80Hz – 12 kHz (speaker)
- Speaker balance control adjusts level between the two speakers.
- Full Stereo, two channel reception, perfect for Dual Watch receiving systems
- Heil Speaker Phase reversal helps to‘dig out’ weak signals
- Connects to standard Heil headset adapters (AD-1 series, AD1I included)
- Detachable coil cable with comfortable ‘Soft Touch’2”diameter P.T. T.
- Microphone boom swivels 300 degrees so it may be used on the left or right side.
Specifications Generating Element: 7: Dynamic7 iC: iC Electret Frequency Response: 7: 100 Hz - 12 kHz7 iC: 35 Hz - 12 kHz Polar Pattern: 7: Heil Cardioid7 iC: Cardioid Impedance: 7: 600 ohms7 iC: 1.5k ohms Output Level: 7: -57 dB @ 1 kHz
7 iC: -48 dB @ 1 kHz
Weight: 17 oz. Finish: Black, Red, Pink, or Blue
It is the Best Headset for Icom Owners
This is designed specifically for Icom radios. The headset is super comfortable even after 12 hours of Contest activity. The ability to split the audio across the Dual Watch or dual receive on the radio is very useful to make poor audio signals readable. The mic cartridge is wider than the preferred DX machine sharpness, but use the radio EQ settings to peak the midrange to make signals punch through the pile ups easier. I strongly suggest you get the Gear Bag or a case to protect your investment and house the trigger or foot switch when not in use or when operating another station as a guest. I have tried a separate headset and mic configuration and I keep finding this set up the best for my use. This was the way to go for field day as I had no room for the desktop mic on the operating table.
Web DescriptionAD-100The Heil AD-100 has been developed so all Heil dynamic microphones and headsets can be used with the Yaesu FT 100This product requires special order.
Web DescriptionAD-1I8 pin with 1/4" PTT pigtail. For Pro models only.Also available: AD-1 Y, AD-1 K, AD-1 Y 4 pin and AD-1 K 4 pinIn stock
Web DescriptionAD-1 iCMIn stock
Web DescriptionAD-1 IMHeadset Boom-Microphone Adapter Cable, Dynamic, ICOM 8-Pin Modular, w/Mono 1/4 in. Female Jack for PTTThis product requires special order.
Web DescriptionAD-1 KMIn stock