Alinco DJ-X11E/T Wideband Communications Receiver

DJ-X11 2 VFO simultaneous RX. Main-band coverage 0.05~1,299.99995MHz all mode AM/FM/WFM/SSB/CW, Sub-band coverage VHF:118~171MHz/UHF:336~470MHz in AM/NFM. IQ signal and discriminator output to operate SDR or AIS ship-plotting software. A voice-guidance that reads the entering/entered frequencies in English. You may think these features are available only in an expensive desktop radios, but Alinco's new flagship world-class performer DJ-X11 offers such features in a hand-held receiver !

The world is at your fingertips, from aircraft or public safety communications to broadcast or monitoring the short-wave ham bands. Easy-to-read set-mode parameters thanks to full-dot matrix LCD display enable you to customize the radio to suit your own individual monitoring preferences. The free control software allows you to operate the basic functions of DJ-X11 through your PC using an optional ERW-8 cable. Alinco's free utility software makes it easy to catch up with most updated memory-channel editing and function settings. You can also use an optional EDS-12 remote-cable controller to operate it like a portable stereo player.

Leading the way in miniature electronics technology with its revolutionary "credit card" size transceivers and multi-mode scanning receivers, Alinco once again sets a new standard for excellence with the DJ-X11.

Product Details:

• 2VFO simultaneous RX
• Main-band coverage: 0.05 ~ 1,299.99995MHz all mode AM/FM/WFM/SSB/CW (BFO for SSB/CW receive. An external antenna required for practical HF monitoring. Internal bar antenna for AM broadcast reception and earphone antenna feature inclusive.)
• Sub-band coverage: VHF:118 ~ 171MHz/UHF:336�`470MHz in AM/NFM
• 1200 memory channels with adjustable memory banks using utility freeware (optional PC cable required)
• IQ signal and Discriminator output features: DJ-X11 has an IQ signal output that can be used with 3rd-party software to operate as a SDR. 10.7MHz IF discriminator signal can be used with other receiver-related software available on the net such as AIS-plotting.
• Voice-guidance system reads entering/entered frequency in English
• Easy-to-use twin dials
• Pocket size unit measures 61 (W) x 106 (H) x 38 (D) mm / 2.4 (W) x 4.17 (H) x 1.50 (D) in (without projections)
• Rigged Polycarbonate body with rubber protectors
• Selectable tuning steps: 0.05/0.1/1/5/6.25/8.33/9/10/12.5/15/20/25/30/50/100/125/150/200/500kHz/1MHz
• Various scan modes: Preset, programmed, memory, VFO and tone scan
• 3 selectable scan speeds (VFO: 25ch/s, 33ch/s, 100ch/s, Memory: 4.5ch/s, 8.3ch/s, 20ch/s)
• TSQ and DCS decode
• Wire remote-control using optional EDS-12
• Long-lasting 1800mAh Li-Ion battery pack provides nearly 15 hours of operation at full audio output in a single RX mode
• 1200 Alphanumeric (up to 16 characters) memory channels
• Additional 100 memory channels are available for each Dual-mode memory, Search-pass, Priority monitoring and Programmed Scanning pairs
• Large, brightly illuminated full dot-matrix LCD and keypads
• Dual channel-scope (Alinco's patented spectrum-analyzer alike feature)
• Frequency counter and flash tune
• "Bug detector" function searches for hidden transmitters
• Illuminated keypad for comfortable operation
• Standard Drop-in charger fully charges empty EBP-74 in 4 hours
• RF gain and attenuator for both main/sub VFOs
• Analog inversion-scramble decoder***